Search found 6 matches

by cladden
Tue Apr 23, 2019 12:26 pm
Forum: Get Help - Q&A
Topic: Slow start and RPM limit not working
Replies: 2
Views: 31111

Re: Slow start and RPM limit not working

More information: I can’t get the RPM level 1,2,3 settings to limit RPM. I set the RPM % all the way down to 1% for all 3 levels. Then, bridged the normally open underspeed wire with other unlabeled wire in the connector. I tried bridging the overspeed wire to the unlabeled wire too. Nothing differe...
by cladden
Mon Apr 22, 2019 9:34 am
Forum: Get Help - Q&A
Topic: Alarm advice
Replies: 3
Views: 33867

Re: Alarm advice

We are working on a solution that would integrate with the new BT module and the app. When do you expect this will be ready to ship? Is the pricing details for existing customers available? The signals for an alarm system are available on all controllers, they are just not wired outside if alarm is...
by cladden
Mon Apr 22, 2019 9:20 am
Forum: Get Help - Q&A
Topic: Slow start and RPM limit not working
Replies: 2
Views: 31111

Slow start and RPM limit not working

Even with a 52V (14s) battery and QS273 motor, this thing wants to do wheelies off the line. I'm trying to use the slow start to prevent wheelies. I have the throttle wired through the bluetooth module. When I enable the slow start and set the value all the way up (to 10 seconds), nothing different ...
by cladden
Wed Apr 17, 2019 7:47 am
Forum: Get Help - Q&A
Topic: Alarm advice
Replies: 3
Views: 33867

Alarm advice

Does anyone have suggestions for an alarm solution? Ideally the alarm would sound a siren upon detecting movement. I'm hoping for an alarm that integrates well with my 15kW controller and iOS app, but a standalone alarm solution could work too. The 7kW wiring diagram on the website has signals for "...
by cladden
Fri Apr 12, 2019 9:39 am
Forum: Get Help - Q&A
Topic: initial setup: brake visual indication
Replies: 3
Views: 32980

Re: initial setup: brake visual indication

As an aside on the Bluetooth module documentation, I think there’s a mistake in the throttle pin diagram where labels are overlaid onto pictures of both sides. The throttle pin labels on the upper and lower pictures cannot both be true. I think the lower picture labels are correct and the upper labe...
by cladden
Thu Apr 11, 2019 7:23 pm
Forum: Get Help - Q&A
Topic: initial setup: brake visual indication
Replies: 3
Views: 32980

initial setup: brake visual indication

I'm trying to verify the brake is wired correctly. When I bridge the brake EBS- wires together, I see nothing different on the screen. Is there a visual indication of the brake engaged in the iOS app? I have the brake connected according to the "negative" approach as documented here: http://powervel...