20kW Sinewave/Silent Controller - Android-iOS-Bluetooth Smart Dashboard

Affordable, highly configurable electric bike controller that makes your motor powerful and silent at the same time. Now, with added smartphone/Bluetooth functionality standard for all controllers, it's easy to program your ride from an iPhone or Android device. No wires, no laptops, no hassle.

More details

$449.00

More info

  • Battery currents up to 200A
  • Phase currents up to 350A
  • Voltage operating range 48-100v
  • Wireless dashboard for your iPhone (link to app) or Android (link to app) device to monitor: speed, distance, RPM, power consumption, battery charge, range left, and much more;
  • A wide range of features programmable via Bluetooth from your Android or iOS phone or tablet
  • Sinewave power modulation makes motor run quiet and vibration free
  • 24 Next Generation Genuine Ultra Low Resistance (RDS) MOSFETs 
  • Finely adjustable regenerative brake force
  • Input for 3-position speed or power level switch
  • Cruise control input
  • Adjustable Acceleration Ramp-up (hard or soft start) 
  • Larger and stronger box for better heat dissipation and performance
  • Adjustable magnetic flux weakening for higher speeds and efficiency
  • Tested top unloaded speed with flux weakening enabled: 130mph at 100v
  • Size 250 x 120 x 70 mm
  • Weight - 2.3kg

Reviews

Write a review

20kW Sinewave/Silent Controller - Android-iOS-Bluetooth Smart Dashboard

20kW Sinewave/Silent Controller - Android-iOS-Bluetooth Smart Dashboard

Affordable, highly configurable electric bike controller that makes your motor powerful and silent at the same time. Now, with added smartphone/Bluetooth functionality standard for all controllers, it's easy to program your ride from an iPhone or Android device. No wires, no laptops, no hassle.

Write a review

Ask a question

NO registration required!

15 Question(s) answered

If the question you have has not yet been answered here, use the form below to ask something about this addon.

(optional)
*(Required to be notified when an answer is available)
  • Asked by Erik Ryman
    on 03/9/2018
    What is the hole to hole diameter across? I need to see if I can actually use it with my frame. Answer:
    Will respond via email.
  • Asked by csc
    on 03/15/2018
    HiIs this controler able to switch between sensored and sensorless modes, as it seems to be the case for the 15KW version ? (You answered "50,000eRPM in sensored mode. Without hall sensors, it seems to be handle more eRPM" to a question from Nick Ross)Thanks in advance for the answer Answer:
    24F controller is sensored only. eRPMs are more than sufficient for any hub motor we tested.
  • Asked by davy
    on 05/9/2018
    do you have a unlocked version that can handle 200 battery amp 450 phase amp ? Answer:
    It allows to set 200A battery and 450A phase already.
  • Asked by doug
    on 05/23/2018
    do your controllers have variable regen that can be used with a second throtlle Answer:
    Not at the moment.
  • Asked by Luk
    on 05/26/2018
    Hi I am interesting to get this controllerIs it variable regen workingvia 2nd throttle ? I would like to ask about the app dash: Is there feature how much km or miles is left on the battery ? Like estimated range.Thanks Answer:
    Not at the moment.
  • Asked by Jason
    on 05/29/2018
    Hi I have a tft display on my bike Is their a connector for this Answer:
    Depends on the display interface. All controllers have an optional Bluetooth module that allows to use Android or iPhones as dashboards.
  • Asked by Jason Melville
    on 05/29/2018
    Hi will this work with tft display I have 72v battery with 150 bms 8000w motor. 120 controller It is great for 25 mins then starts to stutter as if overheating will not his work Answer:
    Depends on the display interface. All controllers have an optional Bluetooth module that allows to use Android or iPhones as dashboards.
  • Asked by Tony
    on 06/1/2018
    Can this controller be made to handle 100v+? Specifically upto 150v like the 15kW controller? Answer:
    Yes. Please send inquiry to sales@powervelocity.com
  • Asked by Nick Kennedy
    on 08/21/2018
    I just read this below from your Questions section. I am also in Canada V1L6V1. I already tried to order some components from another seller in WA.state. I had the SAME problem as below. The seller was not setup on Shopify for items being shipped to Canada. Will I be able to order from your site or no? I want the 20KW controller. Also, where are you located and what is warranty? 1 year probably? Thank you.... Answer:
    Please send inquiries to sales@powervelocity.com
  • Asked by Matko
    on 08/24/2018
    What happens if hall signal gets crazy at high rpm, or disappers? Do you controllers have power lowering when overheating or some sort of thermal protection? Answer:
    If hall signals are lost, the motor will stop. Controllers with Bluetooth modules have thermal protection against overheating.
  • Asked by Khris
    on 09/12/2018
    does this support pedal assist? Answer:
    Yes.
  • Asked by Michael Sullivan
    on 09/15/2018
    A QS 273 motor has a 5 pin connector which has the following five wires: HA, HB, HC, GND (black), VCC5v (red). Your wiring diagram shows only three hall wires connecting to the controller from the motor. With your controller do I not use the thin black and red wires coming from the QS motor? If so, where in your diagram would I connect these two?Thanks! Michael Answer:
    Hall sensor connection requires five wires: three for hall sensors, one ground (black) and one 5v (red). You can easily identify the hall plug on the controller. I'll update the diagram to make it clear - thank you for that.
  • Asked by Michael Sullivan
    on 09/16/2018
    Can your Android software work properly in landscape mode on a Samsung Tablet? See sketch here: https://c2.staticflickr.com/2/1858/43812296395_9693da59eb_o_d.jpgThanks! Michael Answer:
    Yes, it works fine today, just tested it on Samsung s7. Have you installed the latest version from Google Play?
  • Asked by scott atherton
    on 10/24/2018
    Do you have 20kw 120v controller with alarm in stock? many thanks Answer:
    Yes. please email for details.
  • Asked by a guest
    on 11/12/2018
    can you make this 125 200dc 450phase Answer:
    We have 120v and 150v version but the current needs to stay below 150A.

Product customization

After saving your customized product, remember to add it to your cart.

Text

loader

* required fields