More information: I can’t get the RPM level 1,2,3 settings to limit RPM. I set the RPM % all the way down to 1% for all 3 levels. Then, bridged the normally open underspeed wire with other unlabeled wire in the connector. I tried bridging the overspeed wire to the unlabeled wire too. Nothing differe...

We are working on a solution that would integrate with the new BT module and the app. When do you expect this will be ready to ship? Is the pricing details for existing customers available? The signals for an alarm system are available on all controllers, they are just not wired outside if alarm is...

Even with a 52V (14s) battery and QS273 motor, this thing wants to do wheelies off the line. I'm trying to use the slow start to prevent wheelies. I have the throttle wired through the bluetooth module. When I enable the slow start and set the value all the way up (to 10 seconds), nothing different ...

Does anyone have suggestions for an alarm solution? Ideally the alarm would sound a siren upon detecting movement. I'm hoping for an alarm that integrates well with my 15kW controller and iOS app, but a standalone alarm solution could work too. The 7kW wiring diagram on the website has signals for "...

As an aside on the Bluetooth module documentation, I think there’s a mistake in the throttle pin diagram where labels are overlaid onto pictures of both sides. The throttle pin labels on the upper and lower pictures cannot both be true. I think the lower picture labels are correct and the upper labe...

I'm trying to verify the brake is wired correctly. When I bridge the brake EBS- wires together, I see nothing different on the screen. Is there a visual indication of the brake engaged in the iOS app? I have the brake connected according to the "negative" approach as documented here: http://powervel...