Initial Set-up

Ask questions and get answers if you hit a snug or unsure how to set up your ride
hdserv
Posts: 9
Joined: Sun Nov 17, 2019 5:41 am

Re: Initial Set-up

Unread post by hdserv » Wed Jan 15, 2020 8:17 am

TY for the support!
I removed the motor phase wires and the battery supply wires from the controller.

Then checked the controller for continuity with an ohm meter

Yes, I have continuity between the red battery terminal and green phase terminal. :cry: This combination is the only one that is shorted.
The other combinations (phase terminals to red+ and black-) appear to be normal (no continuity).

The motor appears to be okay? The motor's not grounded and motor resistance between phases seem to be okay.

Is there any repair for the controller?
Did I do irreparable damage from numerous hard accelerations?

Any future recommendations?

Daniel

PVadmin
Site Admin
Posts: 33
Joined: Sat Feb 09, 2019 5:55 pm

Re: Initial Set-up

Unread post by PVadmin » Wed Jan 15, 2020 8:38 am

This is repairable and you can send for repairs. Just need to pay for shipping and this works well if you are within the US. If outside, may take a while and shipping can be costly.
However, we are about to release the new controller model which is a new generation with more power, more compact and has lots of new features. We can offer you the upgrade for 1/2 cost if you like. Any way you want to go, we'll accommodate.
hdserv wrote:
Wed Jan 15, 2020 8:17 am
TY for the support!
I removed the motor phase wires and the battery supply wires from the controller.

Then checked the controller for continuity with an ohm meter

Yes, I have continuity between the red battery terminal and green phase terminal. :cry: This combination is the only one that is shorted.
The other combinations (phase terminals to red+ and black-) appear to be normal (no continuity).

The motor appears to be okay? The motor's not grounded and motor resistance between phases seem to be okay.

Is there any repair for the controller?
Did I do irreparable damage from numerous hard accelerations?

Any future recommendations?

Daniel

hdserv
Posts: 9
Joined: Sun Nov 17, 2019 5:41 am

Re: Initial Set-up

Unread post by hdserv » Wed Jan 15, 2020 12:45 pm

Thank You!
I'm interested in taking two of the new Controllers.
What do you need from me?
You can invoice me at hdserv@yahoo.com

Daniel

PVadmin
Site Admin
Posts: 33
Joined: Sat Feb 09, 2019 5:55 pm

Re: Initial Set-up

Unread post by PVadmin » Sat Jan 18, 2020 11:07 am

PM sent.
hdserv wrote:
Wed Jan 15, 2020 12:45 pm
Thank You!
I'm interested in taking two of the new Controllers.
What do you need from me?
You can invoice me at hdserv@yahoo.com

Daniel

Post Reply